csimms
8th January 2009, 12:11
I have a Win XP home PC with 111G NTFS drive that reboots itself about 30 seconds after the desktop loads. This happens in all boot modes except Safe Mode with Command Prompt. The hard disk access light is consistently going on/off every second like clockwork. I ran a complete AVG anti-virus scan the night before this symptom started but that night there were some minor power blips due to weather so my best guess is that a voltage spike got through the APC UPS and corrupted something in NTFS.
When CHKDSK tries to run on reboot it says it cannot because the system is RAW. Diskmgmt.msc reports a healthy NTFS volume but the error-check process stops after a second with no message.
I can access the files on the drive (through command prompt) and have backed up data to a USB external drive. There seems to be no problems with the data files on the drive but I suspect it since CHKDSK won't run at bootup.
I installed ZAR 8.3 (trial) on the external USB drive and ran it overnight choosing all defaults. This morning I see an explorer view containing about 180 folders with 44K files. I know I can only recover 4 folders with the eval version but as far as I can tell, these are all deleted files and fragments that I don't need to recover. I don't see anything that looks like boot sector files. I would attach the logfile.txt but it's over 3M.
I had to move the PC to my work location and thus powered off the PC and now apparently I can't reload the saved ZAR scan info since I am using the eval version. I don't mind paying the $30 for the software if it will fix this problem.
When CHKDSK tries to run on reboot it says it cannot because the system is RAW. Diskmgmt.msc reports a healthy NTFS volume but the error-check process stops after a second with no message.
I can access the files on the drive (through command prompt) and have backed up data to a USB external drive. There seems to be no problems with the data files on the drive but I suspect it since CHKDSK won't run at bootup.
I installed ZAR 8.3 (trial) on the external USB drive and ran it overnight choosing all defaults. This morning I see an explorer view containing about 180 folders with 44K files. I know I can only recover 4 folders with the eval version but as far as I can tell, these are all deleted files and fragments that I don't need to recover. I don't see anything that looks like boot sector files. I would attach the logfile.txt but it's over 3M.
I had to move the PC to my work location and thus powered off the PC and now apparently I can't reload the saved ZAR scan info since I am using the eval version. I don't mind paying the $30 for the software if it will fix this problem.