Home
 
Download
 
Buy now
 
Tech support
     
Tools
Tutorials
Extras
Screenshots
ZAR 8.3 Manual
Zmeil 2.1 Manual
Zlon 1.0 Manual
Known camera compatibility list
Checklists
Articles
Links
Data recovery quiz
Acronyms
News
Contacts

Home / Extras / ZAR 8.3 Manual / Advanced configuration / Options common to all filsystems

Options common to all filsystems

Quick scan mode

In certain cases, ZAR can recover a filesystem without a need to perform a full scan of the volume. This may provide significant (up to ten times) speed boost compared to the traditional "read all" analysis.

Quick scan mode activates automatically if certain conditions are met. It works with NTFS volumes only. In case ZAR detects that the data gathered during the quick scan is not enough for a filesystem reconstruction, it will revert to the full scan automatically.

Quick scan mode is inhibited if any of the following conditions are met

  • RAID or Digital Image recovery run is performed
  • The filesystem type override is in effect and the specified filesystem type is other than NTFS

Default setting is Automatic. When set to Disabled, quick  scan mode will not activate regardless of the volume condition.

You should disable quick scan mode if you are recovering FAT volume which was accidentally formatted to NTFS.

 

Restaurer les fichiers effacés

Cette option lancée, ZAR tâche de récupérer les fichiers éliminés au cours de la routine d’élimination. Quand ‘normalement’ est en ‘état off’, n’utilisez-la qu’avec un grand nombre d’éliminations, par exemple si vous avez éliminé tout le répertoire de base par méprise.

 

Le seuil de la détection du facteur de grappe

C’est un paramètre technique qui doit être mis à 80%. Ne modifiez-le sans l’exigence explicite du personnel subalterne.

 

Filtrer les fichiers et les répertoires vides

Cette option lancée, les fichiers vides (avec la taille de 0 byte) et les répertoires vides (ceux qui ne contiennent aucuns fichiers ou sous-répertoires) seront fltrés des résultats.

 

Filtrer les fichiers connus mais inutiles

Cette option permet de filtrer quelques fichiers insignifiants ou inutiles. La liste complète des fichiers à filtrer est citée ci-dessous:
  • ~*.tmp les fichiers – les fichiers différents temporaires.
  • ~$*.doc – les fichiers temporaires par Microsoft Word
  • ~wrl*.tmp - les fichiers temporaires par Microsoft Word
  • Les fichiers de System Volume Information
  • $MFT, $Boot, $Volume, $Quota et d’autres fichiers de système NTFS.

<<Configuring general optionsAdvanced configurationPhysical drive and partition options>>

Special offers

Nightly discount
starts in 12 hours 41 min

Our customers say

Sounds good, but it didn't identify my camera as a drive. I use an Olympus C740UZ with an XD picture card, and Windows XP. Windows reads the camera as removeable disk E: but ZA failed to pick it up. I tried all the different processes suggested by ZA help, without success. Shame, because all the other reviews suggest it's a nice little bit of software. Try it anyway, you've got nothing to lose.


 
Sitemap
Copyright © 2001-2008 ZAR Data Recovery
[Data recovery]

There are currently 133 visitors browsing the site.